Access beyond the market.

Vision for the future

Product Certification

Computation, electronics and telecommunications.

Regarding the certification process, ISATEL contributes to meeting the essential requirements for the manufacture, commercialization and import of products in our country. Together, we achieve that all the companies that require it obtain the recognition and endorsement that their products have, among other conditions, the quality, safety, and efficiency that the Mexican market demands, a situation that directly have an impact on their level of acceptance and prestige. We promote an efficiency policy in our processes, so our commitment is to optimize times and costs for our clients, as well as to avoid unnecessary delays in the delivery of certificates.

Homologation

Thanks to our experience and our highly qualified team, we can efficiently carry out the processes with the Federal Institute of Telecommunications (IFT), to obtain the homologation certificates of the equipment that operate through the radioelectric spectrum, such as the cell phone technology. In the case of equipment with analog or digital terminals, they are carried out through laboratory tests, so that the corresponding homologation definitive certificate issued by the IFT is finally obtained. It should be noted that these homologation certificates are issued by the IFT to approve wireless communication to the equipment that uses the band ranges and powers allowed under the Mexican laws for telecommunications published by the Ministry of Communications and Transportation (SCT).

Access to the World

In the era of Internationalization

In accordance with the current Quality Infrastructure Law in Mexico, the Official Mexican Standards (Normas Oficiales Mexicanas) are the technical regulations of mandatory observance issued by the competent authorities, whose essential purpose is the promotion of quality, through the establishment of rules, denomination, specifications or characteristics applicable to a good, product, process, or service, as well as those related to terminology, information marking or labeling.

Our experience is mainly focused on electrical safety, telecommunications, commercial information, and energy efficiency standards. Still, if our clients require advisory or information on any additional standard, we are in the best position to guide and support them for its compliance.

The Standards that we certify are the following:

Electrical Safety

NOM-001-SCFI-2018

Electronic Devices – Safety Requirements and Test Methods.

NOM-003-SCFI-2014

Electrical Products – Safety Specifications. Household appliances.

NOM-016-SCFI-1993

Electronic Office devices fed by several electric power supplies – Security requirements and test methods.

NOM-019-SCFI-1998

Data processing equipment security.

Energy efficiency

NOM-029-ENER-2017

Energy efficiency of external power supply. Limits, test methods, marking and labeling.

NOM-032-ENER-2013

Maximum electric power limits for equipment and appliances requiring standby energy. Test methods and labelling.

CONSUMO ENERGÉTICO

Energy consumption for the catalog of equipment and appliances for which manufacturers, importers, distributors, and marketers must include information on their consumption.

Telecommunications

NOM-192-SCFI/SCT1-2013

Telecommunications – Television and decoders – Specifications.

NOM-196-SCFI-2016

Terminal equipment that is connected or interconnected through wired access to a public telecommunications network.

NOM-208-SCFI-2016/ IFT-008-2015

Spread-spectrum radiocommunications systems – Frequency-hopping and digital modulation radiocommunications equipment operating in the bands 902-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz – Specifications and testing methods.

NOM-218-SCFI-2017/ NOM-218-SCFI-2017

Digital interface to public networks (Digital interface to 2 048 KBIT/S and to 34 368 KBIT/S).

NOM-221/2-SCFI-2018/ IFT-011-2017 parte 2

Specifications of mobile terminal equipment that can use the radio spectrum or be connected to telecommunications networks. Part 1. Identity Code of Equipment Manufacture (IMEI) and functionality of receiver of sound broadcasting in Frequency Modulation (FM).

NOM-221/2-SCFI-2018

Technical specifications for compliance with the maximum levels of non-ionizing radioelectric emissions of telecommunications products, equipment, devices and appliances that may be connected to a telecommunications network and/or use the radio spectrum. Specific absorption rate (SAR).

IFT-012-2019

Technical specifications for compliance with the maximum levels of non-ionizing radioelectric emissions of telecommunications products, equipment, devices and appliances that may be connected to a telecommunications network and/or use the radio spectrum. Specific absorption rate (SAR).

DT-IFT-011-2022 Part 3

Technical Specifications of Mobile Terminal Equipment that can make use of the radioelectric spectrum or be connected to telecommunications networks. Part 3. Cellular Broadcasting Service for notification of Risk or Emergency situations

Commercial information

NOM-024-SCFI-2013

Commercial information for packaging, instructions and warranties for electronic and electrical products, and household appliances.

NOM-050-SCFI-2004

Commercial information – General product labeling.

NOM-051-SCFI/SSA1-2010

General labeling specifications for prepackaged food and non-alcoholic beverages – Commercial and health information.

Información importante

  • All products that are marketed in Mexico require compliance with commercial information in Spanish. The commercial information standards check aspects such as packaging, operation manuals, and warranty formats. Other standards verify the percentage of content of materials and symbols to give indications on specific care.
  • There are standards for non-alcoholic beverages and prepackaged foods that require reporting of the percentages of ingredients, substances, nutrients, and raw materials that compose them, as well as the indications for conservation and expiration date.

Other Standards

NOM-010-SCFI-1994

Measuring instruments – Non-automatic weighing instruments – Metrological and technical requirements.

Our services add value to our clients’ businesses, through a vision that prioritizes constant improvement.

Some of our added values are: personalized attention, administration, and heed to the requirements of your certificates to keep them current, obtaining samples with manufacturers and attention in follow-up visits.

We have the resources to be able to provide you: visits abroad, bilingual staff, procedures and online information transfer, attention to manufacturers and attendance to international events.

With all our strengths to serve our clients, ISATEL achieves optimal results and makes a difference so our clients’ products can enter the Mexican market.

About us

For more than 25 years ISATEL, a leading company in specialized consulting, advisory and management services to obtain certificates of compliance (NOM) in the electrotechnical, telecommunications and information technology sectors. We support our clients by providing a wide range of value-added solutions and services that include, among others, laboratory technical tests in accordance with the compliance assessment scheme of the Quality Infrastructure System in Mexico (Sistema Nacional de Infraestructura de la Calidad).

Our Success

Our independent services add value to the operations and import processes of our user´s products, which contribute to the sustainability of their businesses, managing long-term profitability. Thus, we base our high reliability above the expectations of customers and society. ISATEL bases its credibility on teamwork, service spirit and best practices, which allows us to provide the best delivery times with all the legal support that this requires, to facilitate the successful insertion of our clients into the global value chains, characteristic of national and international markets.

Our purpose

The needs and requirements demanded by the market in which we develop are the reason for our existence. Our purpose stands firm, remain being leader in quality solutions and services in the Compliance Assessment area.

Benefits and Infraestructure

– Strict confidentiality in the handling of information
– Advisory and consultancy abroad
– Bilingual technical staff
– Timely notice of the expiration of certificates
– Optimal response times
– Technical analysis for grouping models
– Personal attention to follow-up visits
– Automation of internal procedures

– Efficient communication media and equipment
– Viable and safe transport equipment
– High-end technology for information processing
– We have ISO 9001:2015 certification
– Personnel with great competence and experience in the sector
– High standards of quality and service vision
– Financing during the certification process
– Online consultation of your certificates in real time